British Industries Company

“ Tracking force indicator — sets desired tracking force. Tonearm set-down adjustment — adjusts set-down position of stylus at edge of record. Cueing lever — initiates safe damped lowering or raising of tonearm. . .can be used as pause control. Precision gimbal bearings — for minimal horizontal and vertical pivotal friction. Bias force adjustment knob — sets corresponding Bias force. Tonearm counterweight permits dynamic zero balancing of entire tonearm, while insuring maximum damping. Pickup height adjustment screw — user adjustable for optimum tonearm lift. ”

“ Grasp the connector in the center with a pair of tweezers or needle nosed pliers. Carefully press the connector on to the pin of the cartridge. If you have difficulty sliding it on all the way, place a small screwdriver at the point shown in the diagram and gently push the connector in place. ”

“ Tonearm lifts too high. Tonearm lifting height adjustment incorrectly set. Adjust height in accordance with instructions, Page 5. Tonearm will not lower to record at any time, or will not track properly. Stylus force too low. Adjust settings of counterbalance weight and pickup stylus force in accordance with instructions, page 3. Tonearm will not lower for automatic use after manual play. Cue control is in "up" position. Move control back to "down" position. Tonearm will not rise from its rest. Arm locked to its rest. Move locking lever to free tonearm. Records do not drop. ”