The Spirella Company

“ Determine location of the waist line by placing a string about the waist at the smallest circum­ference as usual.
Waist Size is the waist measure without deduc­tion. Bust Size is a smooth measurement around the body taken over the fullest part of the bust, with or without deduction as the figure requires. ”

“ Measurements alone do not determine the model to be placed on a figure. They tell but half the story. The general contour of the figure, the par­ticular location of fullness or scantiness as well as measurements must determine the model to be used. Good judgment must be employed at all times ”

“ Development 15:14-17 means that the bust meas­urement at top of corset is 15 inches larger than waist size; that the hip measurement 61⁄2 inches below waist line is 14 inches larger and measured 9 inches below is 17 inches larger. In various models of corsets the bust and hip fullness is dis­tributed differently to meet the requirements of figures having fleshy back and under arm, or those having full heavy busts and the large back or side hip, or large protruding abdomen. ”

“ Many ailments, such as lumbago and kidney troubles, as well as hernia, are directly traceable to unsupported corpulency. To wear abdominal supporters is to prevent disease and add grace and comfort to the body. ”

“ When corset is properly laced and adjusted place the tape with buckle around waist, usually at point of least circumference, so that the lower edge of the tape is exactly upon waist line, draw tightly and fasten to hold stationary while all longitudinal measurements are taken. ”

“ The Spirella Abdominal Supporter for Men, Style "E," is scientifically designed to support ab­dominal corpulency. Boned with the unbreakable, rust proof Spirella Boning. Comfortable, hygienic, durable, the best made. Standard sizes 36 to 48, actual measurement on line I to L of Diagram, page 14. For prices see Price List.
12 ABDOMINAL SUPPORTERS, STYLE "D."
Abdominal Supporters are recognized by Physi­cians as a necessity for men and women with a pronounced tendency to corpulency. ”

“ The lines showing under bust, center. bust, over bust, boning, soft extension, and groin are also clearly marked. Compare carefully with Diagram "A."
Special and custom Measurements. The Under Bust portion (see line 6-8, Diagram "A") . extends from the waist line to that portion on the body where the bust begins to swell. This measurement is consid­ered only in Special or Custom work. The dis­tance necessarily varies, being greater or less on different figures.
Breathing Space is room allowed in a corset starting at waist line and extending to bust to give plenty of room through diaphragm. ”

“ B.--Back-From waist line to top in back for above. From waist line to bottom in back for below.
CLASPS--Tapering Clasps (sometimes called graduated clasps) used in corsets for stout figures are three-eighths of an inch wide at the top, grad­ually increasing in width to three-fourths of an inch at the waist line and one inch at the bottom, thus adding strength at waist line and support at bot­tom for prominent abdomen. This clasp cannot be furnished in lengths greater than 14 inches.
Hose Supporters can be furnished separately and in any quantity at prices in Price List. ”