Dip (geology)

Definition and stakes

Portrait of Sir Charles Lyell Sir Charles Lyell,  A Manual of Elementary Geology

“ If a stratum or bed of rock, instead of being quite level, be inclined to one side, it is said to dip; the point of the compass to which it is inclined is called the point of dip, and the degree of deviation from a level or horizontal line is called the amount of dip, or the angle of dip. Thus, in the annexed diagram (fig. 68.) , a series of strata are inclined, and they dip to the north at an angle of forty-five degrees. The strike, or line of bearing, is the prolongation or extension of the strata in a direction at right angles to the dip ”
Source: Gutenberg

John Phillips,  A Treatise on Geology (1852)

“ At present the most important things taught us by the phenomena of dipping strata are these:—1. The dip is related to the elevation of ground; and 2. The strata do not descend from one mountain chain below the surface of plain countries more than a very moderate depth (four to five miles) before they begin to rise again toward another axis of elevated ground.
The principal mountain chains and groups are thus seen to be the axes of declination of the stratified rocks
”
Source: Wikisource

H. J. L. Beadnell,  The topography and geology of the Fayum province of Egypt

“ Apart from the presence of sediments varying greatly in hardness and durability, the fact that the whole of the rocks have an almost constant northerly dip of two or three degrees is a point of prime importance. So small a dip may be scarcely noticeable in any one place, but over the large areas with which we have to deal its influence on the position and level of any individual bed is very marked and the topography of the region would have been essentially different if the strata had been quite horizontal. ”
Source: Gutenberg

Get perspective with Kwize: daily news enlightened by great literature