Iron chain

“ Billy looked at him questioningly.
“That was rather technical, wasn’t it, Billy? You see, I was talking to a technical man. Just between you and me, meteoric iron comes down from the sky, from what we call shooting stars. Sometimes large pieces are found. I suppose that much of it falls into the sea. It is the purest iron that has ever been found.”
“What about magnetic iron?” asked Dr. Crandon. “Where does that come from?”
“At the present time,” answered Mr. Prescott, “most of it comes from Sweden and Norway. It makes the best kind of steel. ”

“ Open-hearth iron is practically pure iron, having no constituents or slag inclusions which materially affect its properties.
2. Wrought iron, for all practical purposes, is pure iron 86except for its content of slag. It is the only one of the iron family which does normally contain slag.
3. Neither open-hearth iron nor wrought iron contains carbon in appreciable quantities.
4. The distinguishing and active element of the steel family is carbon. With increase of carbon the hardness of the alloy increases as does its tensile strength, but the ductility (elongation or stretch) decreases. ”

“ Ordinary cast iron, while strong and hard enough for many purposes, still is brittle by reason of the large proportion of carbon and other impurities which it contains. These impurities may be burned out in the puddling process, and the nearly pure iron thus obtained, called malleable or wrought iron, has a toughness enabling it to resist far greater strains than cast iron can stand. Intermediate between the two irons, and containing one per cent of carbon, more or less, is still another product, steel, which may be made even more tenacious than wrought iron, or even harder than cast iron. ”

“ Similar alloys of iron with the other elements mentioned are made in an electric furnace by reducing the mixed oxides with carbon.
Pure iron. Perfectly pure iron is rarely prepared and is not adapted to commercial uses. It can be made by reducing pure oxide of iron in a current of hydrogen at a [Pg 349] high temperature. Prepared in this way it forms a black powder; when melted it forms a tin-white metal which is less fusible and more malleable than wrought iron. It is easily acted upon by moist air.
Compounds of iron. ”

“ Soft iron is characterised by its attaining a fibrous fracture after forging, whilst tough iron preserves its granular structure after this operation. Certain sorts of iron, although fairly soft at the ordinary temperature, become brittle when heated and are difficult to weld. These sorts are less suitable for being worked up into small objects. The variety of the properties of iron depends on the impurities which it contains. In general, the iron used in the arts still contains carbon and always a certain quantity of silicon, manganese, sulphur, phosphorus, &c. ”

“ Some kinds are broken up to be used as foundation for roads; others are granulated by being run into water, and so made into cement. Over in Germany, where the ores are rich in phosphorus, they grind up the linings of the furnace to make phosphatic fertilizers for the farmers.”
“Then,” said Dr. Crandon, “the making of iron involves the use of chemistry, doesn’t it?”
“It certainly does,” answered Mr. Prescott; “from the chemical composition of ores to the finished product. We are learning a great deal just now from the chemists about steel alloys. ”

“ Again, iron which has been excited by a loadstone, * if that iron on account of obstacles should not be able to turn round immediately in accordance with its nature, as happens with a versorium, is laid hold of, when a loadstone approaches, on either side or at either end. Because, just as it can implant, so it can suddenly change the polarity and turn about the formal energies to any part whatever. So variously can iron be transformed when its form is adventitious and has not yet been long resident in the metal. ”

“ For the iron is not taken possession of and allured by material effluvia, after the manner of electricks, but only by the immaterial action of its form or an incorporeal progression, which in a piece of iron as its subject acts and is conceived, as it were, in a continuous homogeneous body, and does not need more open ways. ”

“ Wrought iron is softer than cast iron, and, being pure iron, is more liable to be corroded by the action of the atmosphere and products of combustion of the powder; it possesses also considerable ductility. The tensile strength of wrought iron, which under the most favorable circumstances is double that of the best cast iron, depends on the character of the crystalline structure, and the manner of applying the tensile force, or in other words, wrought iron offers the greatest resistance to a force of extension when the structure is fibrous, and the force acts in the direction of the fibres. ”

“ As the carburets of iron, whether in the form of pig or of steel, may be considered as alloys, if they be presented to other metals, the results must necessarily be different from what occurs when pure iron is exposed to the same substance. The union that may take place in the one instance may not occur in the other. It may often happen, that when the iron is pure, a true chemical combination will occur, while in the other case, no more than a mechanical mixture can be effected. ”

“ It is so highly 75refined that it can hardly be called steel at all but is often called “open-hearth iron” or “ingot iron.” It is probably the purest iron on the market in commercial quantities to-day. While in the chemical laboratory iron of considerably greater purity can be made, for a commercial product this is remarkably pure, seldom containing more than 1⁄4 per cent of elements other than the metal, iron. ”

“ The existence of the iron depends on the presence within it of a substantial form, which is the cause of its properties, e.g. brightness, hardness, weight. But, by degrees, the iron becomes converted into a mass of rust, which is dull, and soft, and light, and, in all other respects, is quite different from the iron. ”

“ As a commercial product, such as is used in the arts and manufactures and by the smith, it is always combined with other substances, such as carbon, silicon, and phosphorus.
Iron is distributed through the earth very widely, but not always in sufficient quantities to make its extraction from the ore profitable; consequently the ores used for the extraction of iron are somewhat limited. There are four general grades of iron ore, which are known by the following names: magnetite, red hematite, limonite, and ferrous carbonate. ”

“ Pig-iron, or, as it is sometimes called, crude iron, being saturated with carbon and oxygen, and containing also a portion of scoria, is too brittle for any other purpose than castings. Many of these, such as stoves, grates, mill-irons, plough-irons, and kitchen utensils, are commonly manufactured at blast furnaces, and in many cases nearly all the iron is used for these purposes. In such cases, the metal is taken in a liquid state, from the hearth, in ladles. ”

“ By the hypothesis, the iron-producing industry, like all the other industries throughout the community, yields only as much iron as is habitually required for all the purposes to which iron is applied: ship-building being only one. If, then, extra iron is required for ship-building, the first effect is to withdraw part of the iron habitually consumed for other purposes, and to raise the price of iron. ”

“ The strength of iron is at its maximum in the smallest mechanical structures.
2. The quality of the metal is improved as it is subjected to greater pressure and condensation.
The extent to which this improvement may be carried has never yet been ascertained; every fresh manipulation improves its quality. The tenacity of wrought iron is best displayed in a wire, drawn out until it is not thicker than a human hair. Large masses of wrought iron are weak and spongy in geometrical progression with the mass, and the crystalline or molecular form increases with the mass. ”

“ That is, as soon as a vessel costing millions of dollars leaves the docks, she enters into active competition for a place on the junk pile."
The greatest improvement that can be imagined in the iron situation will be in the discovery and use of alloys or mixtures of iron with other materials. Steel, the strongest of all forms of iron, is an alloy of iron and carbon, and for various purposes these are further mixed with nickel and silicas. Many other alloys have been discovered within the last few years, and each makes possible new uses for iron requiring greater strength. ”

“ If enemies stand around in groups, they make the iron easy to break.
“When we want steel for chisels, for example, we invite Tungsten to come in; when we want certain parts for automobiles we call in some Vanadium pygmies.”
“So,” said Mr. Prescott, “while we need the giants to make the pig iron, the real value of the iron and steel depends on the pygmies.”
“That’s about the size of it,” said Mr. Farnsworth.
“Anything the trouble with you, young chap?” asked Dr. Crandon. “You haven’t spoken for ten minutes. Feel bad anywhere?”
“No,” answered Billy. ”

“ We say that the iron made by the ancients was in reality a variety of what we now term wrought iron, for it fulfilled three of the principal requirements for wrought iron, viz., it was not necessarily melted during production, it was a malleable metal, and it contained cinder or slag, but practically no carbon. ”

“ It is so, and that is one of its worst properties. Every liquor, and even a moist air corrode it. But the rust of iron is not pernicious: on the contrary, it is a very useful medicine.
Geo. I have heard of steel drops and steel filings given for medicine.
Tut. Yes; iron is given in a variety of forms, and the property of them all is to strengthen the constitution. Many springs are made medicinal by the iron that they dissolve in the bowels of the earth. These are called chalybeate waters, and they may be known by their inky taste, and the rust-coloured sediment they leave in their course. ”

“ CHAPTER XI. IRON—NICKEL—COBALT—ZINC—CADMIUM. IRON.
Iron rusts or oxidises very readily, and, consequently, is rarely found in the metallic state in nature; such native iron as is found being generally of meteoric origin or imbedded in basalt and other igneous rocks. It chiefly occurs as oxide, as in magnetite, hæmatite, and in the brown iron ores and ochres. Chalybite, which is carbonate of iron, is an ore of great importance. Iron is found combined with sulphur in pyrrhotine and pyrites, and together with arsenic in mispickel. ”

“ Pure iron is never obtained commercially, the metal always being mixed with various proportions of carbon, silicon, sulphur, phosphorus, and other elements, making it more or less suitable for different purposes. Iron is magnetic to the extent that it is attracted by magnets, but it does not retain magnetism itself, as does steel. Iron forms, with other elements, many important combinations, such as its alloys, oxides, and sulphates. ”

“ Cold iron, however, cannot retain in the chemically combined form as much carbon as does molten iron, so, during the solidification and cooling of the alloy, more or less of its carbon was precipitated, i.e., thrown out of solution and from chemical combination with the iron, the amount depending mainly upon the speed of the cooling. ”

“ It will be seen that wrought iron is usually very nearly pure iron, while steel contains an appreciable amount of alloy material, chiefly carbon, and cast iron still more of the same substances. It is impossible, however, to assign a given sample of iron to one of these three classes on the basis of its chemical composition alone. A low carbon steel, for example, may contain less carbon than a given sample of wrought iron. ”

“ Hardly a step of our progress or an incident of our civilization has not in one way or another been influenced by the properties of iron and steel. It is remarkable that these properties have been determined by the relations subsisting between a mass of iron, itself protean in its nature, and the few tenths per cent of carbon it contains. ”

“ A bar of iron is to be rubbed with the levigated powder of the following vegetable products among others: the belleric myrobalans, clitoria ternatea, vitis quadrangularis, boharhaavia diffusa and verbesina calend. It is then strongly heated to the fusion point and plunged into the decoction of the myrobalans. The iron is then powdered by being beaten with an iron hammer. ”

“ Water saturated with fixed air dissolves iron, and makes a pleasant chalybeat.
The calx of iron gives a green colour to glass.
[Pg 107] Iron readily combines with sulphur. When they are found combined by nature, the substance is called pyrites.
The union of phosphoric acid with iron makes it brittle when cold, commonly called cold short; and the union of arsenic makes it brittle when hot, thence called red short.
Iron unites with gold, silver, and platina, and plunged in a white heat into mercury, it becomes coated with it ”

“ But it must be admitted that the highly-heated pieces of iron bear a very small proportion indeed to the total mass of iron in the world at any moment. No doubt there are many tons of iron now white-hot, but there are many millions of tons of iron once white-hot, but now no warmer than the air around. ”

“ Prescott. “Heat expands iron. If we didn’t keep it cool, the screw wouldn’t be the right size when it is done.
“Cold naturally works the other way. Ever hear about the iron bridge where the parts wouldn’t quite come together, so they put ice on to do the job?” he asked, but he kept right on, without waiting for Billy to answer.
Billy saw other machines boring holes and rounding corners. It seemed as if iron could cut iron into any shape that anybody wanted. ”