Sodium sulfide

“ The reaction of the chlorinated derivatives with sodium sulphite solution, is an important feature in the microscopic diagnosis of lignified fibres and cells. The reagent is prepared by dissolving chlorine to saturation in water. The sodium sulphite solution is prepared by dissolving the crystallised salt in 20 parts distilled water.
Aniline Sulphate Solution.—With this reagent lignose gives a characteristic deep yellow colouration. A convenient strength is a 2 per cent. solution of the salt. The colour is more quickly developed if the reagent is acidified ”

“ The sulphuretted hydrogen method also has the advantage of quick reduction under varying conditions, and the further one of adding nothing objectionable to the solution; in fact it removes certain impurities. The disadvantages are the necessity for boiling off the excess of the gas, and of filtering off the precipitated sulphur, although this last is not necessary if precipitated cold. The tendency with students is to get high results. The sodium sulphite method has the advantages of being clean and neat, and of requiring no nitration. ”

“ Sodium is the metallic base of soda. It is silver white with a high lustre; crystallizes in cubes; of the consistence of wax at ordinary temperatures, and completely liquid at 194°, and139 volatilizes at a bright red heat. It is very generally diffused throughout nature though apparently somewhat less abundantly than potassium in the solid crust of the globe.
Salt, the chloride of sodium, a natural compound of one atom of chloride and one of sodium. It occurs as a rock inter-stratified with marl, and sandstones, and gypsum, and as an element of salt springs, sea water, and salt water lakes. ”

“ Such distinctions between the elements, according to their power of giving one or several saline forms, is a radical property of no less importance than the basic or acid properties of their oxides. Sodium as a typical metal does not form any acid oxides, whilst chlorine, as a typical non-metal, does not form bases with oxygen. Therefore sodium as an element may be thus characterised: it forms one very stable salt-forming oxide, Na2O, having powerful basic properties, and its salts are of the general formula, NaX, therefore in its compounds it is, like hydrogen, a basic and univalent element. ”

“ In the second process, they were treated in a drum for twenty-four hours with a solution of sodium sulphide, they were then drummed for twenty-four hours in a solution of hyposulphite of soda, and finally placed in a vat or pit containing a solution of lime and a little arsenic for two to five days. After washing, etc., they were ready for tanning. The sulphide of sodium swelled the hides or skins by distending the fibres, and the natural fat is converted into a soluble soap. The hyposulphite arrests the action of the sulphide and acts as an antiseptic. ”

“ If it be heated in oxygen gas in excess, it burns, and is converted into the peroxide of sodium, which, when mixed with combustible bodies, and exposed to the action of heat, deflagrates with violence, giving off its excess of oxygen, and becoming changed into soda, or protoxide of sodium.
Experiment 64. When sulphuret of sodium is mixed with chlorate of potassa, and struck with a hammer, a detonation will ensue; and when sodium is heated nearly to fusion, in contact with sulphuretted hydrogen gas, it will unite with the sulphur; flame will be produced, and hydrogen gas set at liberty. ”

“ The reactions of decomposition of sodium sulphate are above all noticeable by the separation of oxygen. Sodium sulphate by itself is very stable, and it is only at a temperature sufficient to melt iron that it is possible to separate the elements SO3 from it, and then only partially. However, the oxygen may be separated from sodium sulphate, as from all other sulphates, by means of many substances which are able to combine with oxygen, such as charcoal and sulphur, but hydrogen is not able to produce this action. ”

“ Relative Injuriousness of the Several Salts.—Of the three sodium salts that usually constitute the bulk of “alkali,” only the carbonate of soda is susceptible of being materially changed by any agent that can practically be applied to land. So far as we know, the salt of sodium least injurious to ordinary vegetation is the sulfate, commonly called Glauber’s salt, which ordinarily forms the chief ingredient of “white” alkali. ”

“ The sulphide of sodium that is sometimes used in tanning may supply a part of the sulphur that is complained of in modern libraries. A second cause is the practice of using split skins, which gives a binding only half as strong and lasting as the old whole skins; and a third cause may be found in the gases escaping from the hot-air furnaces with which libraries are warmed, which are hardly less destructive than the products of illumination, and are more constantly in action. ”

“ The mixture at first melts in the solution of the sulphate and sulphuric acid formed by the heat of combination; as heating is continued it gradually becomes solid and finally very hard; it has become gray in color. When it is perfectly 14 dry a test is made to see if it dissolves in sodium hydroxide giving a clear solution. If so, sulphonation is complete. By using an oven with a glass door the reaction mixture can be watched and the completion of the baking observed. However the test for complete solubility should always be made. ”

“ By sublimation with chloride of sodium, the sulphate of ammonium is converted, by double decomposition, into chloride of ammonium, which sublimes; and sulphate of sodium, which remains in the subliming pot. A similar change occurs when the solution of the sulphate, prior to crystallisation, is decomposed by the addition of chloride of sodium, or any other chloride. When the ‘gas-liquor’ is at once converted into chloride of ammonium by the addition of hydrochloric acid, the sublimation merely purifies the salt. Like changes occur when bone-spirit is employed. ”

“ A fragment thrown on the surface of water rapidly disengages hydrogen, which gas, however, does not inflame, as happens with potassium; but inflammation occurs if hot water be used, or if the metal be dropped on moist filter paper. Sodium also combines directly, sometimes very energetically, with most non-metallic elements. It also combines with dry ammonia at 300-400° to form sodamide, NaNH 2 , a white waxy mass when pure, which melts at 155°. Heated in a current of carbon dioxide sodamide yields caustic soda and cyanamide, and with nitrous oxide it gives sodium azoimide ”

“ Sodium is a soft silver-white metal, scarcely solid at common temperatures, fuses at 194° Fahr., and volatilises at a red heat; it oxidises very rapidly in the air; when placed on the surface of cold water, it decomposes that liquid with great violence, but generally without flame, in which it differs from potassium; on hot water it burns with a bright yellow flame—in both cases a solution of pure soda being formed. Sp. gr. ”

“ The chemical reactions of sodium hydroxide serve as a type for those of a whole class of alkalis—that is, of soluble basic hydroxides, MOH. The solution of sodium hydroxide is a very caustic liquid—that is to say, it acts in a destructive way on most substances, for instance on most organic tissues—hence caustic soda, like all soluble alkalis, is a poisonous substance; acids, for example hydrochloric, serve as antidotes. ”

“ If a solution of sodium sulphate which has been saturated at a temperature of about 34° be cooled down to a temperature below 17°, while care is taken that the solution is protected against access of particles of Glauber's salt, crystals of a second hydrate of sodium sulphate, having the composition Na2SO4,7H2O, separate out. ”

“ Sulphates may be detected by heating the salt mixed with sodium carbonate on charcoal in the reducing flame of the blowpipe; sodium sulphide is thus formed, and may be identified by the black stain produced if the mass be transferred to a silver coin and then moistened. In solution. sulphates are always detected and estimated by the formation of a white precipitate of barium sulphate, insoluble in water and all the common reagents. Manufacture.-The first step in its manufacture is the combustion of sulphur. ”

“ The example of sodium sulphate is historically very important for the theory of solutions. Notwithstanding the number of investigations which have been made, it is still insufficiently studied, especially from the point of the vapour tension of solutions and crystallo-hydrates, so that those processes cannot be applied to it which Guldberg, Roozeboom, Van't Hoff, and others applied to solutions and crystallo-hydrates. ”

“ Uriage has a very large amount of chloride of sodium in its springs. Cold sulphur waters are on the whole more used in liver and indigestion than warm ones. The general effects of warm sulphur Waters differ so little at the various baths as to make it difficult to mention anything special to particular localities. ”

“ When sulphides or mercaptans in glacial acetic acid solution are heated with permanganate, the resulting sulphonic acid compounds exhibit great similarity to compounds containing free carboxyl groups. The sulphonic acid group may also be directly introduced either by concentrated, or by fuming sulphuric acid, or by elimination of halogen by the action of sodium or silver sulphite on the halogen derivatives of the aliphatic compounds. ”

“ Gay Lussac and Thenard find a suboxide of sodium in the same way as that of potassium, and it is probably a compound of soda and sodium: the remarkable oxidation which produces soda is, I should imagine, the protoxide or one atom to one, as obtained by placing sodium in contact with water. A higher oxide is obtained as with potassium, by burning sodium in oxygen gas with a vivid heat. It resembles the yellow oxide of potassium in its appearance and properties. The degree of oxidation varies in the different experiments from 11⁄4 to 13⁄4 times the oxygen of soda. ”

“ If an alkali, sodium or ammonium hydroxide, is added to the solution, a heavy precipitate of ferrous sulphide is immediately formed (exp.) . The salts of hydrogen sulphide, like all common salts, as we have just seen, are very much more highly ionized than is hydrogen sulphide itself, and the addition of the alkali has the effect of increasing enormously406 the concentration of sulphide-ion, say to x [S2−] (p. 202) . ”

“ Again, the greenish-yellow and intensely poisonous gas, chlorine, unites in definite proportions by weight with the soft, wax-like, and highly poisonous metal sodium to produce the white crystalline solid chloride of sodium (common salt) , a compound which, except in very large quantities, is not only not poisonous, but actually beneficial to health.
Such combinations are called chemical compounds, and the force which binds their constituents together is distinguished from all other attractive forces by the term affinity or chemical affinity. ”

“ The nitrous gases employed in the ordinary chamber process of manufacturing sulphuric acid also act catalytically. Mention may be made of the part played by water vapour in conditioning many chemical reactions. Thus sodium will not react with dry chlorine or dry oxygen; carbon, sulphur and phosphorus will not burn in perfectly dry oxygen, neither does nitric oxide give red fumes of the peroxide. ”

“ The operation is finished when all the sodium sulphide has been converted into normal sodium carbonate, partly also into acid sodium carbonate (bicarbonate) NaHCO3; at the same time a precipitate is formed, consisting of ferrous sulphide, alumina and silica, which is removed by another settling tank, and the clear liquor is now ready either for boiling down in a “fishing-pan” for the manufacture of white soda-ash, or for the process of causticizing.
Soda-ash (as well as caustic soda) is sold by degrees of “available soda.” ”

“ It is prepared on the industrial scale for the manufacture of sulphuric acid, for the preparation of sodium sulphate by the Hargreaves process, and for use as a bleaching-disinfecting agent and as a preservative. When compressed it is also used largely as a refrigerating agent, and in virtue of its property of neither burning nor supporting combustion it is also used as a fire extinct or. The solution of the gas in water is used under the name of sulphurous acid. The free acid has not been isolated, since on evaporation the solution gradually loses sulphur dioxide. ”

“ The principal of these are sulphide of sodium and red arsenic. Mixtures of sulphide of sodium and lime, or red arsenic and lime are now largely used, the former for hides, calf, and sheep skins, and the latter for goat and kid skins. Both sulphide of sodium and arsenic dissolve keratinous matters (horns, hair, etc.) and workmen should, therefore, be provided with rubber gloves to prevent the loss of their finger nails. Sulphides naturally lower the commercial value of the hair removed and, if used alone, destroy it. ”

“ The sodium remains at the bottom of the liquid. Pure sodium may, however, be prepared at once, by subjecting incinerated tartrate of soda to heat in the apparatus of Brunner, described under Potassium. It is white, like silver; softer and more malleable than any other metal, and may be readily reduced into very thin leaves. It preserves its malleability till it approaches the melting point. Its specific gravity is 0·970. It softens at the temperature of 122° F., and at 200° it is perfectly fluid; but it will not rise in vapour until heated to nearly the melting point of glass. ”