Sewing stitch

Definition and stakes

Portrait of Thérèse de Dillmont Thérèse de Dillmont,  Encyclopedia of Needlework

“ Top or over-sewing stitch (fig. 11) .—This stitch is used for joining selvedges together. To keep the two pieces even, it is better, either to tack or pin them together first. Insert the needle, from right to left, under the first thread of the selvedge, and through both edges, and sew from right to left, setting your stitches not more than three threads apart. The thread must not be drawn too tightly, so that when the seam is finished and flattened with the thimble, the selvedges may lie, side by side. ”
Source: Gutenberg

by Butterick Pattern Company,  The New Dressmaker (1921)

“ SLIP-STITCHING is used when invisible sewing is required for holding hems, facings, trimmings, etc. It is not a strong sewing, but it is one of the most valuable stitches for finishing work in silk or wool. In this stitch it is necessary to take up only part of the thread in the material. This is what makes it invisible on the right side. The stitches should be taken as far apart as will hold the edge in place. Let the needle slip through the under side of the fold of the hem between the stitches and bring it out through the crease of the fold. ”
Source: Wikisource

The Little Girl's Sewing Book

“ Make a narrow hem down each of the two edges of the opening on the wrong side, then place one hem over the other and backstitch them together across the bottom of the placket; this will make it firm, so that you won’t tear the seam when dressing dolly. When you want to backstitch, you start as you would for running, but only taking one stitch at a time, and for each stitch you put your needle back into the end of the stitch you have just made, so that you have a row of even stitches without any spaces between. ”
Source: Gutenberg

Get perspective with Kwize: daily news enlightened by great literature