Electrical device

“ Electricians now began to be sedulous in their experiments upon the new force by friction, then the only known method of generating electricity. In 1729, Stephen Gray, a pensioner of the Charter-house, contrived a method of making electrical signals through a wire 765 feet long ”

“ The electrical machines in common use are composed of a hollow glass cylinder, or circular plate of glass, turning on an axis, and rubbing against two or more leather rubbers covered with silk, the electricity being collected by sharp points fixed in a metal rod standing on a glass pillar. ”

“ Having described the electrical machine, we are now to consider some of the phenomena attending its operation. When the prime conductor receives electricity from the cylinder, it is said to be electrified by communication, and it then acts in every respect like the cylinder itself, except that the latter, when touched by a conductor communicating with the earth, gives a considerable number of sparks before it is discharged; whereas the conductor discharges itself by a single spark. ”

“ It is not our purpose here to describe at length the electrical machine, but we may state that it consists of two parts, one for generating electricity by means of the friction of a rubber against glass, and another consisting of a system of brass tubes, of considerable surface, supported on glass stems, for collecting and retaining the electricity so produced. This latter part of the machine is called its prime conductor. ”

“ CHAPTER LIII.—THE ELECTRICAL MACHINE, AND HOW TO MAKE IT. In our chapter on the Leyden Jar we assumed that those of our readers who were likely to experiment in frictional electricity would be in possession of an electrical machine to start with. Many, however, may be desirous of building an electrical machine of their own. ”

“ Every one knows that when by means of an ordinary electrical machine electricity has been generated in sufficient quantity and under suitable conditions to prevent its dispersion, a spark of intense brilliancy and greater or less length, according to the amount of electricity thus collected, can be obtained when some body, not similarly electrified, is brought near to what is called the conductor of the machine. ”

“ In the case, therefore, of the electrical machine, it appears that the accumulation of electricity in an insulated conductor is always accompanied by the excitement of the contrary electricity in the surrounding atmosphere, and in every conductor placed near the former conductor. It does not seem possible, in this case, to produce one electricity by itself. ”

“ Fig. 22 shows the form of apparatus that I was then employing for producing undulatory currents of electricity for the purposes of multiple telegraphy. A steel reed A was clamped firmly by one extremity to the uncovered leg h of an electro-magnet E, and the free end of the reed projected above the covered leg. When the reed A was vibrated in any mechanical way, the battery current was thrown into waves, and electrical undulations traversed the circuit B E W E ́, throwing into vibration the corresponding reed A ́ at the other end of the circuit. ”

“ Before entering into the description of the electrotype, we must say a few words on the subject of electricity to the less informed of our readers. The electric fluid, as it is called, may be produced in various ways: the most ordinary is by the friction of glass against silk, as exemplified in the electrical machine, which is familiar to almost every one. But galvanic and voltaic electricity is differently produced. ”

“ In many electrical instruments a wire grating is used to prevent certain parts of the apparatus from being electrified by induction. We know that if a conductor be entirely surrounded by a metallic vessel at the same potential with itself, no electricity can be induced on the surface of the conductor by any electrified body outside the vessel. ”

“ If at this moment any one touches the bunch of keys with his finger, a bright spark will be elicited. The metal is charged with the electricity developed on the paper; if the weather is dry, and the paper thoroughly heated several times, the spark may attain nearly an inch in length.
We can easily construct other electrical apparatus. For instance, an “Electrophorus,” or instrument for obtaining electricity by means of induction, or a Leyden jar, can both be made at home. Let us proceed to construct the former, of which we give an illustration (fig. 201) . ”

“ Fig. 175. The Leyden jar and brass wire discharger.
Thirty-sixth Experiment.
The jar is silently discharged if the balls are removed from the discharger and points used instead; so, also, the whole of the electricity produced by an electrical machine in full action may be readily drawn off by a pointed conductor, such as a needle, placed at the end of a brass wire. Electricity passes much more rapidly through points than rounded surfaces, hence the reason why all parts of electrical apparatus are free from sharp points and rough asperities. ”

“ The term wiring is commonly understood to mean the methods employed in laying the conductors used for the transmission and distribution of electrical energy for lighting, power, and other purposes. Interior wiring, comprises the various methods of installing the conductors from the entrance devices in the walls or other parts of the buildings to the lamps, motors, and other electrical apparatus within the buildings. ”

“ The alternating current will operate incandescent lamps, arc lamps, electric heating apparatus, alternating current motors. It will flow through a straight wire with slightly increased retarding effect, but if the wire be wound on an iron bar its strength is greatly reduced. ”

“ Replace it, and let the cylinder be again wiped; the machine is fit for use.
4. Sometimes the electric matter will not be well collected, because the machine is not sufficiently supplied with it from the earth; which happens, when the table upon which the electrical machine is placed and to which the chain or wire of the rubber is connected, is very dry, and consequently a bad conductor. In this case, the best method is to connect the chain or wire of the rubber with some moist ground, or with the iron-work of a water-pump, if convenient. ”

“ The rapid progress that has been made of late years in the application of electricity to industrial purposes, and particularly in the transmission of power by means of the electric motor, has made it imperative for every engineer who wishes to keep up to date to have some knowledge of the way electrical currents are controlled and used for practical purposes. ”

“ Now, if you grasp the outside of the coated end with one hand, and touch the knobbed wire with the other, you will receive a shock.
96In this experiment, the coated part of the tube answers the double purpose of the electrical machine and Leyden phial; the uncoated part serving as a handle, to hold the instrument by. The friction on the outside accumulates a quantity of positive electricity upon it, and this electricity, in virtue of its sphere of action, forces out a quantity from the inside. ”

“ ELECTRIC TOY MAKING, DYNAMO BUILDING, AND ELECTRIC MOTOR CONSTRUCTION. By PROF. T. O'CONOR SLOANE. This work treats of the making at home of electrical toys, electrical apparatus, motors, dynamos and instruments in general, and is designed to bring within the reach of young and old the manufacture of genuine and useful electrical appliances. The work is especially designed for amateurs and young folks. Thousands of our young people are daily experimenting, and busily engaged in making electrical toys and apparatus of various kinds. ”

“ A disused and abandoned electric conductor, such as a telegraph
wire.
(c) A wire in use, but through which, at the time of speaking, no
current is passing.
Death, Electrical.
Death resulting from electricity discharged through the animal system.
The exact conditions requisite for fatal results have not been
determined. High electro-motive force is absolutely essential; a
changing current, pulsatory or alternating, is most fatal, possibly
because of the high electro-motive force of a portion of each period. ”

“ CONDUCTORS AND INSULATORS
Bodies differ from each other in a striking manner in the freedom with which the electric current moves upon them. If the electric current be imparted to a certain portion of the surface of glass or wax, it will be confined strictly to that portion of the surface which originally receives it, by contact with the source of electricity ”

“ In use either the prime conductor or cushions are connected by a chain
or otherwise with the earth. Assume it to be the cushions. As the
machine is worked by turning the plate, the glass and cushion being in
contact develop opposite electricities. The glass is charged with
positive electricity, and as it turns carries it off and as it reaches
the prime conductor by induction and conduction robs it of its negative
electricity. Meanwhile the cushions negatively excited deliver their
charge to the earth. The action thus goes on, the prime conductor being
charged with positive electricity. ”

“ The annunciator has a bell to call attention. A cable of six wires enters this annunciator (Fig. 36) . One wire goes direct to the bell and the other five reach the bell through the separate coils of the electro-magnets which control the drops. But how are [70] electrical connections made between a moving elevator car and the push buttons on various floors? The diagram in Fig. 37 shows this in elevation. B represents a battery of several dry cells located in the basement. One wire from it runs direct to the push buttons 1, 2, 3, 4, 5, located upon the five floors of the house. ”

“ It is very easy to detect the electric lines which radiate from every part of such a wire when a spark jumps between the terminals S of the coil. All that is necessary to do is to pass the wire through a sensitive film and to develop the film. The accompanying photograph (Fig. 3) was taken at the top of such a wire, by means of a very powerful apparatus at my command. When the photograph is examined with a microscope the arborescent electric lines radiating from the wire, like the rays of light Fig. 2a represents a more complete electrical arrangement of the receiver circuit. ”

“ THE ELECTRIC TRUMPET.
There are many toys which one meets with in the scientific stores, the making of which for themselves would give great satisfaction to enterprising devotees of the electrical art. They are for the most part easily constructed, and a great deal of amusement can be derived from them. I have my doubts whether the fathers and mothers of the amateur electrician will thank me for introducing the subject of the present article, but they must take comfort in the thought that if it works well it shows real constructive power on the part of the maker. ”

“ If the electrical stand be kept clean and dry, a man standing on it when such clouds are passing low, might be electrified and afford sparks, the rod drawing fire to him from a cloud. If any danger to the man should be apprehended (though I think there would be none) let him stand on the floor of his box, and now and then bring near to the rod, the loop of a wire that has one end fastened to the leads, he holding it by a wax handle; so the sparks, if the rod is electrified, will strike from the rod to the wire, and not affect him. ”

“ Although any conductor of electricity has capacity to some degree, that property is substantially enhanced in a circuit by the use of a condenser, consisting of two or more metal plates separated by a non-conductor, such that when a voltage is applied to the circuit one plate will become positively and the other negatively charged.↑ A coherer was a device disclosed by Branly as early as 1891. ”

“ All wires and current carrying parts should be kept far enough apart at all points to prevent accidental contact or the jumping across of the 428 current where there is a great difference of voltage. Such wires should be also kept at a sufficient distance from screw heads, metal brackets, gas pipes, water pipes, and other conducting bodies, in order to prevent accidental grounds or short circuits. ”

“ If an insulated conductor, connected with the positive conductor of an electrical machine, have a metal rod 0.3 of an inch in diameter projecting from it outwards from the machine, and terminating by a rounded end or a small ball, it will generally give good brushes; or, if the machine be not in good action, then many ways of assisting the formation of the brush can be resorted to ”

“ If the two wires attached to the plates are now connected with electric lamps, or a motor, or other device, the active material will develop energy in the effort to again change its nature. This energy takes the form of an electric current, which leaves the battery and passes through the conductors and operates the lamps, motors, or other devices in its passage. ”

“ The Plate Electrical Machine. Fig. 7 also shows an old form of machine. Such machines are made of circular plates of glass or ebonite, two rubbing pads being usually employed, one on each side of the plate. One operator is seen on an insulated stool (Fig. 7) , the electricity passing through him before entering the earth by way of the body of the man at the right.
Fig. 8.
11. The Toepler-Holtz Machine, in one form, is shown in Fig. 8. The electricity is produced by the principle of induction, and not by mere friction. This machine, used in connection with condensers, produces large sparks. ”

“ Q shows a stout wire or strip of 2 or 3 thicknesses of tin. Suppose we have an apparatus, as, for example, an electric bell, which we want to have ring when someone at a distance desires to call us. If we use a telephone or telegraph instrument we shall want to cut the bell out of the circuit as soon as we hear the call and are ready to talk. Suppose the current comes to us through the wire, A, Fig. ”

“ This large metallic surface supports a much greater electrical atmosphere than a rod of iron of 50 times the weight would do. It is suspended by silk lines, and when charg'd will strike at near two inches distance, a pretty hard stroke so as to make one's knuckle ach. Let a person standing on the floor present the point of a needle at 12 or more inches distance from it, and while the needle is so presented, the conductor cannot be charged, the point drawing off the fire as fast as it is thrown on by the electrical globe. ”