Steel tube

Definition and stakes

1911 Encyclopædia Britannica (1911)

“ Seamless tubes, which are stronger than those just described, are made by drawing a bloom of the metal perforated by an axial hole or provided with a core of some refractory material, or, in certain cases, by forcing the plastic metal by hydraulic pressure through an appropriate die. The seamless steel tube industry is now of great dimensions owing to the development of steam engineering. Another type of seamless tube is the cast-iron tube, usually of large diameter and employed for gas and water mains ”
Source: Wikisource

Portrait of Ernest Leopold Ahrons Ernest Leopold Ahrons,  Steam Locomotive Construction and Maintenance (1921)

“ They are tightened in the holes by means of a tube expander, a special tool provided with a number of rollers. This is placed inside the tubes, the metal of which is rolled outwards until they are a tight fit in the holes. In the case of steel tubes a ridge or beading is also rolled on the tube on the boiler side of the firebox tubeplate. Brass or copper tubes are expanded and secured by driving short pieces of steel tube (called ferrules) tightly into the ends which pass through the tubeplate. At the smokebox end the tubes are merely expanded, neither beading nor ferrules being used. ”
Source: Wikisource

la Verne W. Spring,  Non-technical chats on iron and steel and their application to modern industry (1917)

“ The tube is thus slowly drawn through the hole in the die. As these dies are of very hard material, either hard cast iron or hardened steel with hole a little smaller than outside of the tube, they compress the tube upon the mandrel inside and the thickness of wall is thus regulated, the excess metal being squeezed out so that the tube is very materially lengthened. Tallow or grease with the lime-coat lubricate the tube, a little being continually drawn into and through the somewhat funnel-shaped die. ”
Source: Gutenberg

Get perspective with Kwize: daily news enlightened by great literature